public inbox for bitcoindev@googlegroups.com
 help / color / mirror / Atom feed
From: Anthony Towns <aj@erisian.com.au>
To: bitcoin-dev@lists.linuxfoundation.org
Subject: [bitcoin-dev] MAST/Schnorr related soft-forks
Date: Thu, 10 May 2018 22:10:27 +1000	[thread overview]
Message-ID: <20180510121027.GA17607@erisian.com.au> (raw)

Hello world,

After the core dev meetup in March I wrote up some notes of where I
think things stand for signing stuff post-Schnorr. It was mostly for my
own benefit but maybe it's helpful for others too, so...

They're just notes, so may assume a fair bit of background to be able to
understand the meaning of the bullet points. In particular, note that I'm
using "schnorr" just to describe the signature algorithm, and the terms
"key aggregation" to describe turning an n-of-n key multisig setup into
a single key setup, and "signature aggregation" to describe combining
signatures from many inputs/transactions together: those are often all
just called "schnorr signatures" in various places.


Anyway! I think it's fair to split the ideas around up as follows:

1) Schnorr CHECKSIG

  Benefits:
    - opportunity to change signature encoding from DER to save a few
      bytes per signature, and have fixed size signatures making tx size
      calculations easier

    - enables n-of-n multisig key aggregation (a single pubkey and
      signature gives n-of-n security; setup non-interactively via muSig,
      or semi-interactively via proof of possession of private key;
      interactive signature protocol)

    - enables m-of-n multisig key aggregation with interactive setup and
      interactive signature protocol, and possibly substantial storage
      requirements for participating signers

    - enables scriptless scripts and discreet log contracts via
      key aggregation and interactive

    - enables payment decorrelation for lightning

    - enables batch validation of signatures, which substantially reduces
      computational cost of signature verification, provided a single
      "all sigs valid" or "some sig(s) invalid" output (rather than
      "sig number 5 is invalid") is sufficient

    - better than ecdsa due to reducing signature malleability
      (and possibly due to having a security proof that has had more
      review?)

   Approaches:
     - bump segwit version to replace P2WPKH
     - replace an existing OP_NOP with OP_CHECKSCHNORRVERIFY
     - hardfork to allowing existing addresses to be solved via Schnorr sig
       as alternative to ECDSA

2) Merkelized Abstract Syntax Trees

   Two main benefits for enabling MAST:
    - logarithmic scaling for scripts with many alternative paths
    - only reveals (approximate) number of alternative execution branches,
      not what they may have been

   Approaches:
    - replace an existing OP_NOP with OP_MERKLE_TREE_VERIFY, and treat an
      item remaining on the alt stack at the end of script exeution as a
      script and do tail-recursion into it (BIP 116, 117)
    - bump the segwit version and introduce a "pay-to-merkelized-script"
      address form (BIP 114)

3) Taproot

   Requirements:
    - only feasible if Schnorr is available (required in order to make the
      pubkey spend actually be a multisig spend)
    - andytoshi has written up a security proof at
      https://github.com/apoelstra/taproot

   Benefits:
    - combines pay-to-pubkey and pay-to-script in a single address,
      improving privacy
    - allows choice of whether to use pubkey or script at spend time,
      allowing for more efficient spends (via pubkey) without reducing
      flexibility (via script)

   Approaches:
    - bump segwit version and introduce a "pay-to-taproot" address form

4) Graftroot

   Requirements:
    - only really feasible if Schnorr is implemented first, so that
      multiple signers can be required via a single pubkey/signature
    - people seem to want a security proof for this; not sure if that's
      hard or straightforward

   Benefits:
    - allows delegation of authorisation to spend an output already
      on the blockchain
    - constant scaling for scripts with many alternative paths
      (better than MAST's logarithmic scaling)
    - only reveals the possibility of alternative execution branches, 
      not what they may have been or if any actually existed

   Drawbacks:
    - requires signing keys to be online when constructing scripts (cannot
      do complicated pay to cold wallet without warming it up)
    - requires storing signatures for scripts (if you were able to
      reconstruct the sigs, you could just sign the tx directly and wouldn't
      use a script)
    - cannot prove that alternative methods of spending are not
      possible to anyone who doesn't exclusively hold (part of) the
      output address private key
    - adds an extra signature check on script spends

   Approaches:
    - bump segwit version and introduce a "pay-to-graftroot" address form

5) Interactive Signature Aggregation

   Requirements:
    - needs Schnorr

   Description:
    - allows signers to interactively collaborate when constructing a
      transaction to produce a single signature that covers multiple
      inputs and/or OP_CHECKSIG invocations that are resolved by Schnorr
      signatures

   Benefits:
    - reduces computational cost of additional signatures (i think?)
    - reduces witness storage needed for additional signatures to just the
      sighash flag byte (or bytes, if it's expanded)
    - transaction batching and coinjoins potentially become cheaper than
      independent transactions, indirectly improving on-chain privacy

   Drawbacks:
    - each soft-fork introduces a checkpoint, such that signatures that
      are not validated by versions prior to the soft-fork cannot be
      aggregated with signatures that are validated by versions prior to
      the soft-fork (see [0] for discussion about avoiding that drawback)

   Approaches:
    - crypto logic can be implemented either by Bellare-Neven or MuSig
    - needs a new p2wpkh output format, so likely warrants a segwit
      version bump
    - may warrant allowing multiple aggregation buckets
    - may warrant peer-to-peer changes and a new per-tx witness

6) Non-interactive half-signature aggregation within transaction

   Requirements:
     - needs Schnorr
     - needs a security proof before deployment

   Benefits:
     - can halve the size of non-aggregatable signatures in a transaction
     - in particular implies the size overhead of a graftroot script
       is just 32B, the same as a taproot script

   Drawbacks:
     - cannot be used with scriptless-script signatures

   Approaches:
     - ideally best combined with interactive aggregate signatures, as it
       has similar implementation requirements

7) New SIGHASH modes

   These will also need a new segwit version (for p2pk/p2pkh) and probably
   need to be considered at the same time.

8) p2pk versus p2pkh

   Whether to stick with a pubkeyhash for the address or just have a pubkey
   needs to be decided for any new segwit version.

9) Other new opcodes

   Should additional opcodes in new segwit versions be reserved as OP_NOP or
   as OP_RETURN_VALID, or something else?

   Should any meaningful new opcodes be supported or re-enabled?

10) Hard-fork automatic upgrade of p2pkh to be spendable via segwit

   Making existing p2pk or p2pkh outputs spendable via Schnorr with
   interactive signature aggregation would likely be a big win for people
   with old UTXOs, without any decrease in security, especially if done
   a significant time after those features were supported for new outputs.

11) Should addresses be hashes or scripts?

   maaku's arguments for general opcodes for MAST make me wonder a bit
   if the "p2pkh" approach isn't better than the "p2wpkh" approach; ie
   should we have script opcodes as the top level way to write addresses,
   rather than picking the "best" form of address everyone should use,
   and having people have to opt-out of that. probably already too late
   to actually have that debate though.

Anyway, I think what that adds up to is:

 - Everything other than MAST and maybe some misc new CHECKVERIFY opcodes
   really needs to be done via new segwit versions

 - We can evaluate MAST in segwit v0 independently -- use the existing
   BIPs to deploy MAST for v0; and re-evaluate entirely for v1 and later
   segwit versions.

 - There is no point deploying any of this for non-segwit scripts

 - Having the taproot script be a MAST root probably makes sense. If so,
   a separate OP_MERKLE_MEMBERSHIP_CHECK opcode still probably makes
   sense at some point.

So I think that adds up to:

 a) soft-fork for MAST in segwit v0 anytime if there's community/economic
    support for it?

 b) soft-fork for OP_CHECK_SCHNORR_SIG_VERIFY in segwit v0 anytime

 c) soft-fork for segwit v1 providing Schnorr p2pk(h) addresses and
    taproot+mast addresses in not too much time

 d) soft-fork for segwit v2 introducing further upgrades, particularly
    graftroot

 e) soft-fork for segwit v2 to support interactive signature aggregation

 f) soft-fork for segwit v3 including non-interactive sig aggregation

The rationale there is:

  (a) and (b) are self-contained and we could do them now. My feeling is
  better to skip them and go straight to (c)

  (c) is the collection of stuff that would be a huge win, and seems
  "easily" technically feasible. signature aggregation seems too
  complicated to fit in here, and getting the other stuff done while we
  finish thinking about sigagg seems completely worthwhile.

  (d) is a followon for (c), in case signature aggregation takes a
  *really* long while. It could conceivably be done as a different
  variation of segwit v1, really. It might turn out that there's no
  urgency for graftroot and it should be delayed until non-interactive
  sig aggregation is implementable.

  (e) and (f) are separated just because I worry that non-interactive
  sig aggregation might not turn out to be possible; doing them as a
  single upgrade would be preferrable.

Cheers,
aj

[0] https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2018-March/015838.html



             reply	other threads:[~2018-05-10 12:10 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-10 12:10 Anthony Towns [this message]
2018-05-10 14:23 ` [bitcoin-dev] MAST/Schnorr related soft-forks Russell O'Connor
2018-05-10 20:11   ` Bram Cohen
2018-05-10 22:44 ` Chris Belcher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180510121027.GA17607@erisian.com.au \
    --to=aj@erisian.com.au \
    --cc=bitcoin-dev@lists.linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox