public inbox for bitcoindev@googlegroups.com
 help / color / mirror / Atom feed
* [Bitcoin-development] Reducing the block rate instead of increasing the maximum block size
@ 2015-05-11  7:03 Sergio Lerner
  2015-05-11 10:34 ` Peter Todd
                   ` (2 more replies)
  0 siblings, 3 replies; 10+ messages in thread
From: Sergio Lerner @ 2015-05-11  7:03 UTC (permalink / raw)
  To: bitcoin-development

In this e-mail I'll do my best to argue than if you accept that
increasing the transactions/second is a good direction to go, then
increasing the maximum block size is not the best way to do it. I argue
that the right direction to go is to decrease the block rate to 1
minute, while keeping the block size limit to 1 Megabyte (or increasing
it from a lower value such as 100 Kbyte and then have a step function).
I'm backing up my claims with many hours of research simulating the
Bitcoin network under different conditions [1].  I'll try to convince
you by responding to each of the arguments I've heard against it.

Arguments against reducing the block interval

1. It will encourage centralization, because participants of mining
pools will loose more money because of excessive initial block template
latency, which leads to higher stale shares

When a new block is solved, that information needs to propagate
throughout the Bitcoin network up to the mining pool operator nodes,
then a new block header candidate is created, and this header must be
propagated to all the mining pool users, ether by a push or a pull
model. Generally the mining server pushes new work units to the
individual miners. If done other way around, the server would need to
handle a high load of continuous work requests that would be difficult
to distinguish from a DDoS attack. So if the server pushes new block
header candidates to clients, then the problem boils down to increasing
bandwidth of the servers to achieve a tenfold increase in work
distribution. Or distributing the servers geographically to achieve a
lower latency. Propagating blocks does not require additional CPU
resources, so mining pools administrators would need to increase
moderately their investment in the server infrastructure to achieve
lower latency and higher bandwidth, but I guess the investment would be low.

2. It will increase the probability of a block-chain split

The convergence of the network relies on the diminishing probability of
two honest miners creating simultaneous competing blocks chains. To
increase the competition chain, competing blocks must be generated in
almost simultaneously (in the same time window approximately bounded by
the network average block propagation delay). The probability of a block
competition decreases exponentially with the number of blocks. In fact,
the probability of a sustained competition on ten 1-minute blocks is one
million times lower than the probability of a competition of one
10-minute block. So even if the competition probability of six 1-minute
blocks is higher than of six ten-minute blocks, this does not imply
reducing the block rate increases this chance, but on the contrary, 
reduces it.

3, It will reduce the security of the network

The security of the network is based on two facts:
A- The miners are incentivized to extend the best chain
B- The probability of a reversal based on a long block competition
decreases as more confirmation blocks are appended.
C- Renting or buying hardware to perform a 51% attack is costly.

A still holds. B holds for the same amount of confirmation blocks, so 6
confirmation blocks in a 10-minute block-chain is approximately
equivalent to 6 confirmation blocks in a 1-minute block-chain.
Only C changes, as renting the hashing power for 6 minutes is ten times
less expensive as renting it for 1 hour. However, there is no shop where
one can find 51% of the hashing power to rent right now, nor probably
will ever be if Bitcoin succeeds. Last, you can still have a 1 hour
confirmation (60 1-minute blocks) if you wish for high-valued payments,
so the security decreases only if participant wish to decrease it.

4. Reducing the block propagation time on the average case is good, but
what happen in the worse case?

Most methods proposed to reduce the block propagation delay do it only
on the average case. Any kind of block compression relies on both
parties sharing some previous information. In the worse case it's true
that a miner can create and try to broadcast a block that takes too much
time to verify or bandwidth to transmit. This is currently true on the
Bitcoin network. Nevertheless there is no such incentive for miners,
since they will be shooting on their own foots. Peter Todd has argued
that the best strategy for miners is actually to reach 51% of the
network, but not more. In other words, to exclude the slowest 49%
percent. But this strategy of creating bloated blocks is too risky in
practice, and surely doomed to fail, as network conditions dynamically 
change. Also it would be perceived as an attack to the network, and the
miner (if it is a public mining pool) would be probably blacklisted.

5. Thousands of SPV wallets running in mobile devices would need to be
upgraded (thanks Mike).

That depends on the current upgrade rate for SPV wallets like Bitcoin
Wallet  and BreadWallet. Suppose that the upgrade rate is 80%/year: we
develop the source code for the change now and apply the change in Q2
2016, then  most of the nodes will already be upgraded by when the
hardfork takes place. Also a public notice telling people to upgrade in
web pages, bitcointalk, SPV wallets warnings, coindesk, one year in
advance will give plenty of time to SPV wallet users to upgrade.

6. If there are 10x more blocks, then there are 10x more block headers,
and that increases the amount of bandwidth SPV wallets need to catch up
with the chain
 
A standard smartphone with average cellular downstream speed downloads
2.6 headers per second (1600 kbits/sec) [3], so if synchronization were
to be done only at night when the phone is connected to the power line,
then it would take 9 minutes to synchronize with 1440 headers/day. If a
person should accept a payment, and the smart-phone is 1 day
out-of-synch, then it takes less time to download all the missing
headers than to wait for a 10-minute one block confirmation. Obviously
all smartphones with 3G have a downstream bandwidth much higher,
averaging 1 Mbps. So the whole synchronization will be done less than a
1-minute block confirmation.
 
According to CISCO mobile bandwidth connection speed increases 20% every
year. In four years, it will have doubled, so mobile phones with lower
than average data connection will soon be able to catchup.
Also there is low-hanging-fruit optimizations to the protocol that have
not been implemented: each header is 80 bytes in length. When a set of
chained headers is transferred, the headers could be compressed,
stripping 32 bytes of each header that is derived from the previous
header hash digest. So a 40% compression is already possible by slightly
modifying the wire protocol.
 
7. There has been insufficient testing and/or insufficient research into
technical/economic implications or reducing the block rate
 
This is partially true. in the GHOST paper, this has been analyzed, and
the problem was shown to be solvable for block intervals of just a few
seconds. There are several proof-of-work cryptocurrencies in existence
that have lower than 1 minute block intervals and they work just fine.
First there was Bitcoin with a 10 minute interval, then was LiteCoin
using a 2.5 interval, then was DogeCoin with 1 minute, and then
QuarkCoin with just 30 seconds. Every new cryptocurrency lowers it a
little bit. Some time ago I decided to research on the block rate to
understand how the block interval impacts the stability and capability
of the cryptocurrency network, and I came up with the idea of the DECOR+
protocol [4] (which requires changes in the consensus code). In my
research I also showed how the stale rate can be easily reduced only
with changes in the networking code, and not in the consensus code.
These networking optimizations ( O(1) propagation using headers-first or
IBLTs), can be added later.
 
Mortifying Bitcoin to accommodate the change to lower the block rate
requires at least:
 
- Changing the 21 BTC reward per block to 2.1 BTC
- Changing the nPowTargetTimespan constant
- Writing code to hard-fork automatically when the majority of miners
have upgraded.
- Allow transaction version 3, and interpret nLockTimes of transaction
version 2 as being multiplied by 10.

All changes comprises no more than 15 lines of code. This is much less
than the number of lines modified by Gavin's 20Mb patch.
 
As a conclusion, I haven't yet heard a good argument against lowering
the block rate.

Best regards,
 Sergio.
 
[0] https://medium.com/@octskyward/the-capacity-cliff-586d1bf7715e
[1] https://bitslog.wordpress.com/2014/02/17/5-sec-block-interval/
[2] http://gavinandresen.ninja/time-to-roll-out-bigger-blocks
[3]
http://www.cisco.com/c/en/us/solutions/collateral/service-provider/visual-networking-index-vni/white_paper_c11-520862.html
[4] https://bitslog.wordpress.com/2014/05/02/decor/



^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: [Bitcoin-development] Reducing the block rate instead of increasing the maximum block size
@ 2015-05-11  7:30 Thy Shizzle
  2015-05-11  8:16 ` Dave Hudson
  0 siblings, 1 reply; 10+ messages in thread
From: Thy Shizzle @ 2015-05-11  7:30 UTC (permalink / raw)
  To: Sergio Lerner, bitcoin-development

[-- Attachment #1: Type: text/plain, Size: 10665 bytes --]

Yes This!

So many people seem hung up on growing the block size! If gaining a higher tps throughput is the main aim, I think that this proposition to speed up block creation has merit!

Yes it will lead to an increase in the block chain still due to 1mb ~1 minute instead of ~10 minute, but the change to the protocol is minor, you are only adding in a different difficulty rate starting from hight blah, no new features or anything are being added so there seems to me much less of a security risk! Also that impact if a hard fork should be minimal because there is nothing but absolute incentive for miners to mine at the new easier difficulty!

I feel this deserves a great deal of consideration as opposed to blowing out the block through miners voting etc!!!!
________________________________
From: Sergio Lerner<mailto:sergiolerner@certimix.com>
Sent: ‎11/‎05/‎2015 5:05 PM
To: bitcoin-development@lists.sourceforge.net<mailto:bitcoin-development@lists.sourceforge.net>
Subject: [Bitcoin-development] Reducing the block rate instead of increasing the maximum block size

In this e-mail I'll do my best to argue than if you accept that
increasing the transactions/second is a good direction to go, then
increasing the maximum block size is not the best way to do it. I argue
that the right direction to go is to decrease the block rate to 1
minute, while keeping the block size limit to 1 Megabyte (or increasing
it from a lower value such as 100 Kbyte and then have a step function).
I'm backing up my claims with many hours of research simulating the
Bitcoin network under different conditions [1].  I'll try to convince
you by responding to each of the arguments I've heard against it.

Arguments against reducing the block interval

1. It will encourage centralization, because participants of mining
pools will loose more money because of excessive initial block template
latency, which leads to higher stale shares

When a new block is solved, that information needs to propagate
throughout the Bitcoin network up to the mining pool operator nodes,
then a new block header candidate is created, and this header must be
propagated to all the mining pool users, ether by a push or a pull
model. Generally the mining server pushes new work units to the
individual miners. If done other way around, the server would need to
handle a high load of continuous work requests that would be difficult
to distinguish from a DDoS attack. So if the server pushes new block
header candidates to clients, then the problem boils down to increasing
bandwidth of the servers to achieve a tenfold increase in work
distribution. Or distributing the servers geographically to achieve a
lower latency. Propagating blocks does not require additional CPU
resources, so mining pools administrators would need to increase
moderately their investment in the server infrastructure to achieve
lower latency and higher bandwidth, but I guess the investment would be low.

2. It will increase the probability of a block-chain split

The convergence of the network relies on the diminishing probability of
two honest miners creating simultaneous competing blocks chains. To
increase the competition chain, competing blocks must be generated in
almost simultaneously (in the same time window approximately bounded by
the network average block propagation delay). The probability of a block
competition decreases exponentially with the number of blocks. In fact,
the probability of a sustained competition on ten 1-minute blocks is one
million times lower than the probability of a competition of one
10-minute block. So even if the competition probability of six 1-minute
blocks is higher than of six ten-minute blocks, this does not imply
reducing the block rate increases this chance, but on the contrary,
reduces it.

3, It will reduce the security of the network

The security of the network is based on two facts:
A- The miners are incentivized to extend the best chain
B- The probability of a reversal based on a long block competition
decreases as more confirmation blocks are appended.
C- Renting or buying hardware to perform a 51% attack is costly.

A still holds. B holds for the same amount of confirmation blocks, so 6
confirmation blocks in a 10-minute block-chain is approximately
equivalent to 6 confirmation blocks in a 1-minute block-chain.
Only C changes, as renting the hashing power for 6 minutes is ten times
less expensive as renting it for 1 hour. However, there is no shop where
one can find 51% of the hashing power to rent right now, nor probably
will ever be if Bitcoin succeeds. Last, you can still have a 1 hour
confirmation (60 1-minute blocks) if you wish for high-valued payments,
so the security decreases only if participant wish to decrease it.

4. Reducing the block propagation time on the average case is good, but
what happen in the worse case?

Most methods proposed to reduce the block propagation delay do it only
on the average case. Any kind of block compression relies on both
parties sharing some previous information. In the worse case it's true
that a miner can create and try to broadcast a block that takes too much
time to verify or bandwidth to transmit. This is currently true on the
Bitcoin network. Nevertheless there is no such incentive for miners,
since they will be shooting on their own foots. Peter Todd has argued
that the best strategy for miners is actually to reach 51% of the
network, but not more. In other words, to exclude the slowest 49%
percent. But this strategy of creating bloated blocks is too risky in
practice, and surely doomed to fail, as network conditions dynamically
change. Also it would be perceived as an attack to the network, and the
miner (if it is a public mining pool) would be probably blacklisted.

5. Thousands of SPV wallets running in mobile devices would need to be
upgraded (thanks Mike).

That depends on the current upgrade rate for SPV wallets like Bitcoin
Wallet  and BreadWallet. Suppose that the upgrade rate is 80%/year: we
develop the source code for the change now and apply the change in Q2
2016, then  most of the nodes will already be upgraded by when the
hardfork takes place. Also a public notice telling people to upgrade in
web pages, bitcointalk, SPV wallets warnings, coindesk, one year in
advance will give plenty of time to SPV wallet users to upgrade.

6. If there are 10x more blocks, then there are 10x more block headers,
and that increases the amount of bandwidth SPV wallets need to catch up
with the chain

A standard smartphone with average cellular downstream speed downloads
2.6 headers per second (1600 kbits/sec) [3], so if synchronization were
to be done only at night when the phone is connected to the power line,
then it would take 9 minutes to synchronize with 1440 headers/day. If a
person should accept a payment, and the smart-phone is 1 day
out-of-synch, then it takes less time to download all the missing
headers than to wait for a 10-minute one block confirmation. Obviously
all smartphones with 3G have a downstream bandwidth much higher,
averaging 1 Mbps. So the whole synchronization will be done less than a
1-minute block confirmation.

According to CISCO mobile bandwidth connection speed increases 20% every
year. In four years, it will have doubled, so mobile phones with lower
than average data connection will soon be able to catchup.
Also there is low-hanging-fruit optimizations to the protocol that have
not been implemented: each header is 80 bytes in length. When a set of
chained headers is transferred, the headers could be compressed,
stripping 32 bytes of each header that is derived from the previous
header hash digest. So a 40% compression is already possible by slightly
modifying the wire protocol.

7. There has been insufficient testing and/or insufficient research into
technical/economic implications or reducing the block rate

This is partially true. in the GHOST paper, this has been analyzed, and
the problem was shown to be solvable for block intervals of just a few
seconds. There are several proof-of-work cryptocurrencies in existence
that have lower than 1 minute block intervals and they work just fine.
First there was Bitcoin with a 10 minute interval, then was LiteCoin
using a 2.5 interval, then was DogeCoin with 1 minute, and then
QuarkCoin with just 30 seconds. Every new cryptocurrency lowers it a
little bit. Some time ago I decided to research on the block rate to
understand how the block interval impacts the stability and capability
of the cryptocurrency network, and I came up with the idea of the DECOR+
protocol [4] (which requires changes in the consensus code). In my
research I also showed how the stale rate can be easily reduced only
with changes in the networking code, and not in the consensus code.
These networking optimizations ( O(1) propagation using headers-first or
IBLTs), can be added later.

Mortifying Bitcoin to accommodate the change to lower the block rate
requires at least:

- Changing the 21 BTC reward per block to 2.1 BTC
- Changing the nPowTargetTimespan constant
- Writing code to hard-fork automatically when the majority of miners
have upgraded.
- Allow transaction version 3, and interpret nLockTimes of transaction
version 2 as being multiplied by 10.

All changes comprises no more than 15 lines of code. This is much less
than the number of lines modified by Gavin's 20Mb patch.

As a conclusion, I haven't yet heard a good argument against lowering
the block rate.

Best regards,
 Sergio.

[0] https://medium.com/@octskyward/the-capacity-cliff-586d1bf7715e
[1] https://bitslog.wordpress.com/2014/02/17/5-sec-block-interval/
[2] http://gavinandresen.ninja/time-to-roll-out-bigger-blocks
[3]
http://www.cisco.com/c/en/us/solutions/collateral/service-provider/visual-networking-index-vni/white_paper_c11-520862.html
[4] https://bitslog.wordpress.com/2014/05/02/decor/

------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
Bitcoin-development mailing list
Bitcoin-development@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bitcoin-development

[-- Attachment #2: Type: text/html, Size: 12998 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: [Bitcoin-development] Reducing the block rate instead of increasing the maximum block size
@ 2015-05-11  8:50 insecurity
  0 siblings, 0 replies; 10+ messages in thread
From: insecurity @ 2015-05-11  8:50 UTC (permalink / raw)
  To: sergiolerner; +Cc: bitcoin-development

> So if the server pushes new block
> header candidates to clients, then the problem boils down to increasing
> bandwidth of the servers to achieve a tenfold increase in work
> distribution.

Most Stratum pools already do multiple updates of the header every block 
period,
bandwidth is really inconsequential, it's the latency that kills. At the 
present
time you are looking up to 15 seconds between the first and last pools 
to push
headers to their clients for the latest block. It's sort of 
inconsequential with
a 10 minute block time, but it cuts into a 1 minute one very heavily.

Some pools already don't do their own validation of blocks, but simply 
mirror
other pools, pushing them to be even more latency focused will just make 
this an
epidemic of invalidity rather than a solution.


> There are several proof-of-work cryptocurrencies in existence
> that have lower than 1 minute block intervals and they work just fine.
> First there was Bitcoin with a 10 minute interval, then was LiteCoin
> using a 2.5 interval, then was DogeCoin with 1 minute, and then
> QuarkCoin with just 30 seconds.

You can't really use these as examples of things going just fine. None 
of these
networks see anything approaching the Bitcoin transaction volume and 
none have
even remotely the same network size. Some Bitcoin forks use floats in 
consensus
critical code and work "just fine", for the moment. We can't justify 
poor
decisions with "but the altcoins are doing it".

Is there even a single study of the stale rates within these networks?



^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2015-05-12 18:55 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-05-11  7:03 [Bitcoin-development] Reducing the block rate instead of increasing the maximum block size Sergio Lerner
2015-05-11 10:34 ` Peter Todd
2015-05-11 11:10   ` insecurity
2015-05-11 11:49     ` Dave Hudson
2015-05-11 12:34       ` Christian Decker
2015-05-11 16:47 ` Luke Dashjr
     [not found] ` <5551021E.8010706@LeoWandersleb.de>
2015-05-12 18:55   ` Sergio Lerner
2015-05-11  7:30 Thy Shizzle
2015-05-11  8:16 ` Dave Hudson
2015-05-11  8:50 insecurity

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox