[bitcoindev] Bitcoin Core 29.0 Released

[Gloria Zhao <gloriajzhao@gmail.com>]

[-- Attachment #1.1: Type: text/plain, Size: 13128 bytes --]

Bitcoin Core version 29.0 is now available from:

  <https://bitcoincore.org/bin/bitcoin-core-29.0/>

This release includes new features, various bug fixes and performance
improvements, as well as updated translations.

Please report bugs using the issue tracker at GitHub:

  <https://github.com/bitcoin/bitcoin/issues>

To receive security and update notifications, please subscribe to:

  <https://bitcoincore.org/en/list/announcements/join/>

How to Upgrade
==============

If you are running an older version, shut it down. Wait until it has 
completely
shut down (which might take a few minutes in some cases), then run the
installer (on Windows) or just copy over `/Applications/Bitcoin-Qt` (on 
macOS)
or `bitcoind`/`bitcoin-qt` (on Linux).

Upgrading directly from a version of Bitcoin Core that has reached its EOL 
is
possible, but it might take some time if the data directory needs to be 
migrated. Old
wallet versions of Bitcoin Core are generally supported.

Compatibility
==============

Bitcoin Core is supported and tested on operating systems using the
Linux Kernel 3.17+, macOS 13+, and Windows 10+. Bitcoin
Core should also work on most other Unix-like systems but is not as
frequently tested on them. It is not recommended to use Bitcoin Core on
unsupported systems.

Notable changes
===============

### P2P and Network Changes

- Support for UPnP was dropped. If you want to open a port automatically,
  consider using the `-natpmp` option instead, which uses PCP or NAT-PMP
depending on router support. (#31130)

- libnatpmp was replaced with a built-in implementation of PCP and NAT-PMP
  (still enabled using the `-natpmp` option). This supports automatic IPv4 
port
forwarding as well as IPv6 pinholing. (#30043)

- When the `-port` configuration option is used, the default onion listening
  port will now be derived to be that port + 1 instead of being set to a 
fixed
value (8334 on mainnet).  This re-allows setups with multiple local nodes 
using
different `-port` and not using `-bind`, which would lead to a startup 
failure
in v28.0 due to a port collision.  Note that a `HiddenServicePort` manually
configured in `torrc` may need adjustment if used in connection with the 
`-port`
option.  For example, if you are using `-port=5555` with a non-standard 
value
and not using `-bind=...=onion`, previously Bitcoin Core would listen for
incoming Tor connections on `127.0.0.1:8334`.  Now it would listen on
`127.0.0.1:5556` (`-port` plus one). If you configured the hidden service
manually in torrc now you have to change it from `HiddenServicePort 8333
127.0.0.1:8334` to `HiddenServicePort 8333 127.0.0.1:5556`, or configure
bitcoind with `-bind=127.0.0.1:8334=onion` to get the previous behavior.
(#31223)

- Upon receiving an orphan transaction (an unconfirmed transaction that 
spends
  unknown inputs), the node will attempt to download missing parents from 
all
peers who announced the orphan. This change may increase bandwidth usage but
make orphan-handling more reliable. (#31397)

### Mempool Policy and Mining Changes

- Ephemeral dust is a new concept that allows a single dust output in a
  transaction, provided the transaction is zero fee. In order to spend any
unconfirmed outputs from this transaction, the spender must also spend this 
dust
in addition to any other desired outputs.  In other words, this type of
transaction should be created in a transaction package where the dust is 
both
created and spent simultaneously. (#30239)

- Due to a bug, the default block reserved weight (`4,000 WU`) for 
fixed-size
  block header, transactions count, and coinbase transaction was reserved 
twice
and could not be lowered. As a result the total reserved weight was always
`8,000 WU`, meaning that even when specifying a `-blockmaxweight` higher 
than
the default (even to the max of `4,000,000 WU`), the actual block size will
never exceed `3,992,000 WU`.  The fix consolidates the reservation into a 
single
place and introduces a new startup option, `-blockreservedweight` which
specifies the reserved weight directly. The default value of
`-blockreservedweight` is set to `8,000 WU` to ensure backward 
compatibility for
users who relied on the previous behavior of `-blockmaxweight`.  The minimum
value of `-blockreservedweight` is set to `2,000 WU`. Users setting
`-blockreservedweight` below the default should ensure that the total 
weight of
their block header, transaction count, and coinbase transaction does not 
exceed
the reduced value or they may risk mining an invalid block. (#31384)

### Updated RPCs

- The RPC `testmempoolaccept` response now includes a `reject-details` 
field in
  some cases, similar to the complete error messages returned by
`sendrawtransaction` (#28121)

- Duplicate blocks submitted with `submitblock` will now persist their block
  data even if it was previously pruned. If pruning is activated, the data 
will
be pruned again eventually once the block file it is persisted in is 
selected
for pruning. This is consistent with the behaviour of `getblockfrompeer` 
where
the block is persisted as well even when pruning. (#31175)

- `getmininginfo` now returns `nBits` and the current target in the `target`
  field. It also returns a `next` object which specifies the `height`, 
`nBits`,
`difficulty`, and `target` for the next block. (#31583)

- `getblock` and `getblockheader` now return the current target in the 
`target`
  field (#31583)

- `getblockchaininfo` and `getchainstates` now return `nBits` and the 
current
  target in the `target` field (#31583)

- the `getblocktemplate` RPC `curtime` (BIP22) and `mintime` (BIP23) fields 
now
  account for the timewarp fix proposed in BIP94 on all networks. This 
ensures
that, in the event a timewarp fix softfork activates on mainnet, un-upgraded
miners will not accidentally violate the timewarp rule. (#31376, #31600) As 
a
reminder, it's important that any software which uses the 
`getblocktemplate` RPC
takes these values into account (either `curtime` or `mintime` is fine).
Relying only on a clock can lead to invalid blocks under some circumstances,
especially once a timewarp fix is deployed. (#31600)

### New RPCs

- `getdescriptoractivity` can be used to find all spend/receive activity
  relevant to a given set of descriptors within a set of specified blocks. 
This
call can be used with `scanblocks` to lessen the need for additional 
indexing
programs. (#30708)

### Updated REST APIs

- `GET /rest/block/<BLOCK-HASH>.json` and `GET 
/rest/headers/<BLOCK-HASH>.json`
  now return the current target in the `target` field

### Updated Settings

- The maximum allowed value for the `-dbcache` configuration option has been
  dropped due to recent UTXO set growth. Note that before this change, large
`-dbcache` values were automatically reduced to 16 GiB (1 GiB on 32 bit
systems). (#28358)

- Handling of negated `-noseednode`, `-nobind`, `-nowhitebind`, 
`-norpcbind`,
  `-norpcallowip`, `-norpcwhitelist`, `-notest`, `-noasmap`, `-norpcwallet`,
`-noonlynet`, and `-noexternalip` options has changed. Previously negating 
these
options had various confusing and undocumented side effects. Now negating 
them
just resets the settings and restores default behaviors, as if the options 
were
not specified.

- Starting with v28.0, the `-mempoolfullrbf` startup option was set to 
default
  to `1`. With widespread adoption of this policy, users no longer benefit 
from
disabling it, so the option has been removed, making full replace-by-fee the
standard behavior. (#30592)

- Setting `-upnp` will now log a warning and be interpreted as `-natpmp`.
  Consider using `-natpmp` directly instead. (#31130, #31916)

- As a safety check, Bitcoin core will **fail to start** when
  `-blockreservedweight` init parameter value is lower than `2000` weight 
units.
Bitcoin Core will also **fail to start** if the `-blockmaxweight` or
`-blockreservedweight` init parameter exceeds consensus limit of `4,000,000 
WU`.

- Passing `-debug=0` or `-debug=none` now behaves like `-nodebug`: 
previously
  set debug categories will be cleared, but subsequent `-debug` options will
still be applied.

- The default for `-rpcthreads` has been changed from 4 to 16, and the 
default
  for `-rpcworkqueue` has been changed from 16 to 64. (#31215).

### Build System

The build system has been migrated from Autotools to CMake:

1. The minimum required CMake version is 3.22.
2. In-source builds are not allowed. When using a subdirectory within the 
root
source tree as a build directory, it is recommended that its name includes 
the
substring "build".
3. CMake variables may be used to configure the build system. **Some 
defaults
have changed.** For example, you will now need to add `-DWITH_ZMQ=ON` to 
build
with zmq and `-DBUILD_GUI=ON` to build `bitcoin-qt`. See [Autotools to CMake
Options
Mapping](https://github.com/bitcoin-core/bitcoin-devwiki/wiki/Autotools-to-CMake-Options-Mapping)
for details.
4. For single-configuration generators, the default build configuration
(`CMAKE_BUILD_TYPE`) is "RelWithDebInfo". However, for the "Release"
configuration, CMake defaults to the compiler optimization flag `-O3`, 
which has
not been extensively tested with Bitcoin Core. Therefore, the build system
replaces it with `-O2`.
5. By default, the built executables and libraries are located in the 
`bin/` and
`lib/` subdirectories of the build directory.
6. The build system supports component‐based installation. The names of the
installable components coincide with the build target names. For example: 
```
cmake -B build cmake --build build --target bitcoind cmake --install build
--component bitcoind ```

7. If any of the `CPPFLAGS`, `CFLAGS`, `CXXFLAGS` or `LDFLAGS` environment
variables were used in your Autotools-based build process, you should 
instead
use the corresponding CMake variables (`APPEND_CPPFLAGS`, `APPEND_CFLAGS`,
`APPEND_CXXFLAGS` and `APPEND_LDFLAGS`). Alternatively, if you opt to use 
the
dedicated `CMAKE_<...>_FLAGS` variables, you must ensure that the resulting
compiler or linker invocations are as expected.

For more detailed guidance on configuring and using CMake, please refer to 
the
official [CMake documentation](https://cmake.org/cmake/help/latest/) and
[CMake’s User Interaction
Guide](https://cmake.org/cmake/help/latest/guide/user-interaction/index.html).
Additionally, consult platform-specific `doc/build-*.md` build guides for
instructions tailored to your operating system.

## Low-Level Changes

### Tools and Utilities

- A new tool
  
[`utxo_to_sqlite.py`](https://github.com/bitcoin/bitcoin/blob/v29.0/contrib/utxo-tools/utxo_to_sqlite.py)
converts a compact-serialized UTXO snapshot (as created with the 
`dumptxoutset`
RPC) to a SQLite3 database. Refer to the script's `--help` output for more
details. (#27432)

### Tests

- The BIP94 timewarp attack mitigation (designed for testnet4) is no longer
  active on the regtest network. (#31156)

### Dependencies

- MiniUPnPc and libnatpmp have been removed as dependencies (#31130, 
#30043).

Credits =======

Thanks to everyone who directly contributed to this release:

- 0xb10c
- Adlai Chandrasekhar
- Afanti
- Alfonso Roman Zubeldia
- am-sq
- Andre
- Andre Alves
- Anthony Towns
- Antoine Poinsot
- Ash Manning
- Ava Chow
- Boris Nagaev
- Brandon Odiwuor
- brunoerg
- Chris Stewart
- Cory Fields
- costcould
- Daniel Pfeifer
- Daniela Brozzoni
- David Gumberg
- dergoegge
- epysqyli
- espi3
- Eval EXEC
- Fabian Jahr
- fanquake
- furszy
- Gabriele Bocchi
- glozow
- Greg Sanders
- Gutflo
- Hennadii Stepanov
- Hodlinator
- i-am-yuvi
- ion-
- ismaelsadeeq
- Jadi
- James O'Beirne
- Jeremy Rand
- Jon Atack
- jurraca
- Kay
- kevkevinpal
- l0rinc
- laanwj
- Larry Ruane
- Lőrinc
- Maciej S. Szmigiero
- Mackain
- MarcoFalke
- marcofleon
- Marnix
- Martin Leitner-Ankerl
- Martin Saposnic
- Martin Zumsande
- Matthew Zipkin
- Max Edwards
- Michael Dietz
- naiyoma
- Nicola Leonardo Susca
- omahs
- pablomartin4btc
- Pieter Wuille
- Randall Naar
- RiceChuan
- rkrux
- Roman Zeyde
- Ryan Ofsky
- Sebastian Falbesoner
- secp512k2
- Sergi Delgado Segura
- Simon
- Sjors Provoost
- stickies-v
- Suhas Daftuar
- tdb3
- TheCharlatan
- tianzedavid
- Torkel Rogstad
- Vasil Dimov
- wgyt
- willcl-ark
- yancy

As well as to everyone that helped with translations on
[Transifex](https://www.transifex.com/bitcoin/bitcoin/).

-- 
You received this message because you are subscribed to the Google Groups "Bitcoin Development Mailing List" group.
To unsubscribe from this group and stop receiving emails from it, send an email to bitcoindev+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/bitcoindev/7897498c-88ec-4c0f-b457-8410944e0ce1n%40googlegroups.com.

[-- Attachment #1.2: Type: text/html, Size: 14610 bytes --]