From: Danny Thorpe <danny.thorpe@gmail.com>
To: Jim Phillips <jim@ergophobia.org>
Cc: Bitcoin Dev <bitcoin-development@lists.sourceforge.net>
Subject: Re: [Bitcoin-development] A suggestion for reducing the size of the UTXO database
Date: Tue, 12 May 2015 12:50:16 -0700 [thread overview]
Message-ID: <CAJN5wHXHtcGWi3uViFcAL4OyPJV9HuNqTGy90c3zKONynNWT6w@mail.gmail.com> (raw)
In-Reply-To: <CANe1mWzBy8-C+CWfwaOLxJ2wokjy8ytQUh2TkRY_Ummn1BpPzw@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4951 bytes --]
Having thousands of utxos floating around for a single address is clearly a
bad thing - it creates a lot of memory load on bitcoin nodes.
However, having only one utxo for an address is also a bad thing, for
concurrent operations.
Having "several" utxos available to spend is good for parallelism, so that
2 or more tasks which are spending from the same address don't have to line
up single file waiting for one of the tasks to publish a tx first so that
the next task can spend the (unconfirmed) change output of the first.
Requiring/Forcing/Having a single output carry the entire balance of an
address does not work at scale. (Yes, this presumes that the tasks are
coordinated so that they don't attempt to spend the same outputs. Internal
coordination is solvable.)
In multiple replies, you push for having "all" utxos of an address spent in
one transaction. Why all? If the objective is to reduce the size of the
utxo pool, it would be sufficient simply to recommend that wallets and
other spenders consume more utxos than they create, on average.
I'm ok with "consume more utxos than you generate" as a good citizen / best
practices recommendation, but a requirement that all prior outputs must be
spent in one transaction seems excessive and impractical.
-Danny
On Sat, May 9, 2015 at 10:09 AM, Jim Phillips <jim@ergophobia.org> wrote:
> Forgive me if this idea has been suggested before, but I made this
> suggestion on reddit and I got some feedback recommending I also bring it
> to this list -- so here goes.
>
> I wonder if there isn't perhaps a simpler way of dealing with UTXO growth.
> What if, rather than deal with the issue at the protocol level, we deal
> with it at the source of the problem -- the wallets. Right now, the typical
> wallet selects only the minimum number of unspent outputs when building a
> transaction. The goal is to keep the transaction size to a minimum so that
> the fee stays low. Consequently, lots of unspent outputs just don't get
> used, and are left lying around until some point in the future.
>
> What if we started designing wallets to consolidate unspent outputs? When
> selecting unspent outputs for a transaction, rather than choosing just the
> minimum number from a particular address, why not select them ALL? Take all
> of the UTXOs from a particular address or wallet, send however much needs
> to be spent to the payee, and send the rest back to the same address or a
> change address as a single output? Through this method, we should wind up
> shrinking the UTXO database over time rather than growing it with each
> transaction. Obviously, as Bitcoin gains wider adoption, the UTXO database
> will grow, simply because there are 7 billion people in the world, and
> eventually a good percentage of them will have one or more wallets with
> spendable bitcoin. But this idea could limit the growth at least.
>
> The vast majority of users are running one of a handful of different
> wallet apps: Core, Electrum; Armory; Mycelium; Breadwallet; Coinbase;
> Circle; Blockchain.info; and maybe a few others. The developers of all
> these wallets have a vested interest in the continued usefulness of
> Bitcoin, and so should not be opposed to changing their UTXO selection
> algorithms to one that reduces the UTXO database instead of growing it.
>
> From the miners perspective, even though these types of transactions would
> be larger, the fee could stay low. Miners actually benefit from them in
> that it reduces the amount of storage they need to dedicate to holding the
> UTXO. So miners are incentivized to mine these types of transactions with a
> higher priority despite a low fee.
>
> Relays could also get in on the action and enforce this type of behavior
> by refusing to relay or deprioritizing the relay of transactions that don't
> use all of the available UTXOs from the addresses used as inputs. Relays
> are not only the ones who benefit the most from a reduction of the UTXO
> database, they're also in the best position to promote good behavior.
>
> --
> *James G. Phillips IV*
> <https://plus.google.com/u/0/113107039501292625391/posts>
>
> *"Don't bunt. Aim out of the ball park. Aim for the company of immortals."
> -- David Ogilvy*
>
> *This message was created with 100% recycled electrons. Please think
> twice before printing.*
>
>
> ------------------------------------------------------------------------------
> One dashboard for servers and applications across Physical-Virtual-Cloud
> Widest out-of-the-box monitoring support with 50+ applications
> Performance metrics, stats and reports that give you Actionable Insights
> Deep dive visibility with transaction tracing using APM Insight.
> http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
> _______________________________________________
> Bitcoin-development mailing list
> Bitcoin-development@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bitcoin-development
>
>
[-- Attachment #2: Type: text/html, Size: 6252 bytes --]
next prev parent reply other threads:[~2015-05-12 19:50 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-09 17:09 [Bitcoin-development] A suggestion for reducing the size of the UTXO database Jim Phillips
2015-05-09 18:45 ` Peter Todd
2015-05-09 19:02 ` Jim Phillips
2015-05-09 19:00 ` Andreas Schildbach
2015-05-09 19:05 ` Jim Phillips
2015-05-09 19:06 ` Pieter Wuille
2015-05-09 19:16 ` Jim Phillips
2015-05-09 19:43 ` Ross Nicoll
[not found] ` <3862E01F-FD0F-48F5-A6D9-F8E0FB0AB68F@newcastle.ac.uk>
[not found] ` <CANe1mWys1gAO1CgPEpD7rdtXF2KYfvXA6bc0q-rAzg9xOFc-5A@mail.gmail.com>
[not found] ` <8029969D-FD22-43F7-930D-CEC7A87CEAD5@newcastle.ac.uk>
2015-05-09 19:28 ` Jim Phillips
2015-05-10 2:11 ` Matt Whitlock
2015-05-10 12:11 ` Jim Phillips
2015-05-25 18:41 ` Mike Hearn
2015-05-25 20:03 ` Matt Whitlock
2015-05-25 20:29 ` Andreas Schildbach
2015-05-25 21:05 ` Peter Todd
2015-05-26 12:40 ` Andreas Schildbach
2015-05-25 21:14 ` Warren Togami Jr.
2015-05-25 21:12 ` Mike Hearn
2015-05-10 13:35 ` Bob McElrath
2015-05-10 14:33 ` Jeff Garzik
2015-05-10 14:42 ` Bob McElrath
2015-05-12 19:50 ` Danny Thorpe [this message]
2015-05-25 18:44 ` Mike Hearn
2015-05-25 21:26 ` Peter Todd
2015-05-25 22:03 ` Mike Hearn
2015-05-26 0:10 ` [Bitcoin-development] Cost savings by using replace-by-fee, 30-90% Peter Todd
2015-05-26 18:22 ` Danny Thorpe
2015-05-26 18:38 ` Allen Piscitello
2015-05-26 18:42 ` Aaron Voisine
2015-05-26 18:47 ` Adam Back
2015-05-26 20:18 ` Matt Whitlock
2015-05-26 20:30 ` joliver
2015-05-26 20:56 ` Mark Friedenbach
2015-05-26 21:29 ` s7r
2015-05-26 22:06 ` Adam Back
2015-05-27 1:25 ` Peter Todd
2015-05-27 19:28 ` s7r
2015-05-26 22:29 ` Jeff Garzik
2015-05-09 19:25 [Bitcoin-development] A suggestion for reducing the size of the UTXO database Raystonn
2015-05-09 19:33 ` Jim Phillips
2015-05-09 19:43 Raystonn
2015-05-09 19:52 ` Jim Phillips
2015-05-09 20:20 Raystonn
2015-05-09 20:38 ` Pieter Wuille
2015-05-09 21:11 ` Jim Phillips
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAJN5wHXHtcGWi3uViFcAL4OyPJV9HuNqTGy90c3zKONynNWT6w@mail.gmail.com \
--to=danny.thorpe@gmail.com \
--cc=bitcoin-development@lists.sourceforge.net \
--cc=jim@ergophobia.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox