From: Allen Piscitello <allen.piscitello@gmail.com>
To: Natanael <natanael.l@gmail.com>
Cc: Bitcoin Development <bitcoin-development@lists.sourceforge.net>
Subject: Re: [Bitcoin-development] [RFC] [BIP proposal] Dealing with malleability
Date: Wed, 19 Feb 2014 19:29:05 -0600 [thread overview]
Message-ID: <CAJfRnm6itmEv6wsFyZGMYVLXSms5v9Q9BfhFfZEoJLxMMiP_2g@mail.gmail.com> (raw)
In-Reply-To: <CAAt2M1-YC8Bv=11AuT=0ATpX60R=g-PhhK+mBK=VHfEO3xLvxQ@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4681 bytes --]
This is somewhat problematic in my use case since some parts need to be in
the chain earlier than others and have the same ID as expected.
https://bitcointalk.org/index.php?topic=260898.10
I haven't gone back to see if there are any ways around it, but the main
problem here is I need the Contract TX to be in the chain much earlier than
redeeming, but I need the refund transaction to be in the chain much
earlier. Perhaps there are some tricks to pull off to get it to work, but
I haven't been working on this for a while so I'm a bit rusty in that area.
This might be helpful enough to help a lot of use cases, but shouldn't be
final.
-Allen
On Wed, Feb 19, 2014 at 6:22 PM, Natanael <natanael.l@gmail.com> wrote:
> Regarding chains of transactions intended to be published at once
> together, wouldn't it be easier to add a "only-mine-with-child flag"?
>
> That way the parent transactions aren't actually valid unless spent
> together with the transaction that depends on it, and only the original
> will have a child referencing it.
>
> Then malleability is not an issue at all for transaction chains if you
> only need to broadcast your full transaction chain once, and don't need to
> extend it in two or more occasions, *after* broadcasting subchains to the
> network, from the same set of pregenerated transactions.
>
> If you need to broadcast pregenerated subchains separately, then you need
> the last child in the chain to be non-malleable.
>
> This would require all miners to start to respect it at once in order to
> avoid forking the network.
>
> - Sent from my phone
> Den 19 feb 2014 22:13 skrev "Pieter Wuille" <pieter.wuille@gmail.com>:
>
> On Wed, Feb 19, 2014 at 9:28 PM, Michael Gronager <gronager@mac.com>
>> wrote:
>> > I think that we could guarantee fewer incidents by making version 1
>> transactions unmalleable and then optionally introduce a version 3 that
>> supported the malleability feature. That way most existing problematic
>> implementations would be fixed and no doors were closed for people
>> experimenting with other stuff - tx v 3 would probably then be called
>> experimental transactions.
>>
>> Just to be clear: this change is not directly intended to avoid
>> "incidents". It will take way too long to deploy this. Software should
>> deal with malleability. This is a longer-term solution intended to
>> provide non-malleability guarantees for clients that a) are upgraded
>> to use them b) willing to restrict their functionality. As there are
>> several intended use cases for malleable transactions (the sighash
>> flags pretty directly are a way to signify what malleabilities are
>> *wanted*), this is not about outlawing malleability.
>>
>> While we could right now make all these rules non-standard, and
>> schedule a soft fork in a year or so to make them illegal, it would
>> mean removing potential functionality that can only be re-enabled
>> through a hard fork. This is significantly harder, so we should think
>> about it very well in advance.
>>
>> About new transaction and block versions: this allows implementing and
>> automatically scheduling a softfork without waiting for wallets to
>> upgrade. The non-DER signature change was discussed for over two
>> years, and implemented almost a year ago, and we still notice wallets
>> that don't support it. We can't expect every wallet to be instantly
>> modified (what about hardware wallets like the Trezor, for example?
>> they may not just be able to be upgraded). Nor is it necessary: if
>> your software only spends confirmed change, and tracks all debits
>> correctly, there is no need.
>>
>> --
>> Pieter
>>
>>
>> ------------------------------------------------------------------------------
>> Managing the Performance of Cloud-Based Applications
>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls.
>> Read the Whitepaper.
>>
>> http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk
>> _______________________________________________
>> Bitcoin-development mailing list
>> Bitcoin-development@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bitcoin-development
>>
>
>
> ------------------------------------------------------------------------------
> Managing the Performance of Cloud-Based Applications
> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls.
> Read the Whitepaper.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk
> _______________________________________________
> Bitcoin-development mailing list
> Bitcoin-development@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bitcoin-development
>
>
[-- Attachment #2: Type: text/html, Size: 6555 bytes --]
next prev parent reply other threads:[~2014-02-20 1:29 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-09 23:33 [Bitcoin-development] [RFC] [BIP proposal] Dealing with malleability Pieter Wuille
2014-02-10 3:00 ` Peter Todd
2014-02-12 15:12 ` Rune Kjær Svendsen
2014-02-12 16:22 ` Alan Reiner
2014-02-12 16:38 ` Allen Piscitello
2014-02-12 16:44 ` Alan Reiner
2014-02-12 20:27 ` Mark Friedenbach
2014-02-12 22:52 ` Luke-Jr
2014-02-13 0:39 ` Alex Morcos
2014-02-13 0:47 ` Gregory Maxwell
2014-02-19 14:11 ` Michael Gronager
2014-02-19 14:38 ` Pieter Wuille
2014-02-19 20:28 ` Michael Gronager
2014-02-19 20:39 ` Gregory Maxwell
2014-02-19 20:49 ` Peter Todd
2014-02-19 21:05 ` Gregory Maxwell
2014-02-19 21:11 ` Pieter Wuille
2014-02-20 0:22 ` Natanael
2014-02-20 1:29 ` Allen Piscitello [this message]
2014-02-20 7:50 ` Natanael
2014-02-20 10:59 ` Michael Gronager
2014-02-20 14:08 ` Mike Hearn
2014-02-20 14:15 ` Gregory Maxwell
2014-02-20 14:29 ` Gavin Andresen
2014-02-20 14:36 ` Gregory Maxwell
2014-02-20 14:58 ` Gavin Andresen
2014-02-20 15:11 ` Pieter Wuille
2014-02-20 15:24 ` Gregory Maxwell
2014-02-21 6:07 ` Mike Hearn
2014-02-21 6:30 ` Gregory Maxwell
2014-02-19 19:15 ` Jeremy Spilman
2014-02-12 17:13 ` Jeff Garzik
2014-02-12 17:21 ` Pieter Wuille
2014-02-12 18:03 ` Gregory Maxwell
[not found] ` <CALf2ePyQeOxL3d+QoaWSYy_cCKaF9qq1StBwXFms9NyedUg3eg@mail.gmail.com>
2014-02-12 18:21 ` Alan Reiner
2014-02-10 4:39 ` Luke-Jr
2014-02-12 16:56 ` Pavol Rusnak
2014-02-12 17:22 ` Pieter Wuille
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAJfRnm6itmEv6wsFyZGMYVLXSms5v9Q9BfhFfZEoJLxMMiP_2g@mail.gmail.com \
--to=allen.piscitello@gmail.com \
--cc=bitcoin-development@lists.sourceforge.net \
--cc=natanael.l@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox